lunedì 18 maggio 2020

 Scarica questa utile infografica su un aggiornamento di filtrazione a due fasi raccomandato.

Il tuo edificio richiede controlli di sicurezza prima della riapertura dopo un periodo di inattività. Per aiutarti nella preparazione, abbiamo compilato un elenco di passaggi che puoi seguire per sentirti sicuro della qualità dell’aria nel tuo edificio.


1. Pulire e sterilizzare tutti i pavimenti, le superfici e trattare l'aria secondo i suggerimenti dell'European Ventilation Hygiene Association. Puoi trovare maggiori informazioni qui.
2. Prima di avviare nuovamente l’unità di trattamento aria (HVAC) a capacità normale, 

a. La sicurezza prima di tutto  – Prima di sostituire i filtri dell'aria sporchi, assicurarsi di indossare guanti, una mascherina e occhiali di sicurezza. Mentre rimuovi lentamente i filtri dell'aria, fai attenzione a non rimuovere la polvere e i detriti, che altrimenti potrebbero rientrare nel flusso d'aria all'interno dell'edificio.
b. Smaltimento dei filtri – Ora che sono stati rimossi i filtri dell'aria sporchi, inserirli nei sacchetti e sigillarli come ulteriore protezione contro la polvere raccolta e le particelle che possono danneggiare  le persone esposte ad esse.
c. Installazione dei filtri dell'aria pulita  – Posizionare i filtri dell'aria pulita all'interno dell'unità HVAC con la freccia del flusso d'aria rivolta verso il motore del ventilatore. Troverai questa freccia del flusso d'aria sul telaio del filtro dell'aria.

3. Non utilizzare apparecchiature di condizionamento dell'aria a ricircolo locale (se possibile), come unità fan-coil e unità a induzione. Questi sistemi hanno in genere una filtrazione a bassissima efficienza che ha un minimo effetto per piccoli aerosol e polveri sottili.
4. Prima di riaprire la tua attività, porta il tuo sistema HVAC a livelli normali, permettendo all'aria di circolare per un paio d'ore prima che le persone entrino nell'edificio.

 

 Importanza della Filtrazione dell’Aria 

La sostituzione dei filtri dell’unità di trattamento aria esterna non è di per sé necessaria, poiché è improbabile che l'aria esterna sia una fonte significativa di coronavirus. I filtri devono tuttavia essere sostituiti secondo i normali programmi di manutenzione, per garantire i normali volumi del flusso d'aria di ventilazione ed evitare sovraccarichi e trafilamenti. Tuttavia, gli esperti suggeriscono di sostituire gli attuali filtri dell'aria come parte di questo processo di preparazione all’apertura . In molti casi, esortano le aziende a migliorare l'efficienza del filtro per catturare particelle ancora più piccole, contribuendo a proteggere clienti e dipendenti dalle particelle sospese nell'aria  ponzialmente in grado di veicolare il virus (ricircolo).

 

Particelle in aria: il veicolo per il trasporto di agenti patogeni 

Piccole particelle virali generalmente si spostano attraverso un edificio grazie a particelle di polvere e/o gocce relativamente più grandi. In generale, le particelle di virus tendono a legarsi, tramite un processo di coagulazione, a particelle (polveri sottili) e aerosol nell'intervallo dimensionale compreso da 0,3 a 10 micron. Fortunatamente, un'adeguata combinazione di filtri dell'aria con una buona efficienza rispetto ai PM1 può catturare la maggior parte delle particelle sospese nell'aria in questo intervallo di dimensioni (> 80%)

 

 

 

Possibili combinazioni di filtri per catturare almeno il 95% ePM1::  


Soluzione incentrata sulla bassa resistenza del sistema:

Efficienza Primo Stadio di Filtrazione : DriPak SX ePM10 70%
Efficienza Secondo Stadio di Filtrazione: Varicel V XL ePM1 55%
N°# di ricircoli per catturare: >3


Soluzione incentrata sul miglioramento dell'efficienza:
Efficienza Primo Stadio di Filtrazione : DriPak SX ePM2,5 65%
Efficienza Secondo Stadio di Filtrazione: Varicel V XL ePM1 85%
N°# di ricircoli per catturare: >2

La nostra soluzione raccomandata per la massima efficienza con il minor numero possibile di cambi d'aria:
Efficienza Primo Stadio di Filtrazione : DriPak NX ePM1 60%
Efficienza Secondo Stadio di Filtrazione: BioCel V (H)XLA 95, E10 with 98% efficiency on ePM1 particles
N°# di ricircoli per catturare: >1

 

 

Efficienza di Filtrazione vs Efficienza Energetica 
In genere ci si può aspettare che un incremento dell'efficienza di filtrazione possa provocare  una diminuzione dell'efficienza energetica. Oltre ad una spesa energetica maggiore, si potrebbe avere anche un usura maggiore dell’impianto di trattamento aria. Tuttavia, grazie al design innovativo del filtro AAF e alle opzioni del media filtrante impiegato, è possibile migliorare l'efficienza di filtrazione garantendo un ottimo  risparmio energetico.

Siamo qui per aiutarvi

AAF offre una serie di strumenti di filtrazione dell'aria, come il software  TCO Diagnostic® ed il sensore  Sensor360®, ®, per identificare una soluzione su misura per le vostre esigenze. Il nostro processo inizia con una verifica del vostro sistema di filtrazione gratuita che ti fornisce:

  • Analisi professionale
  • Dati di riferimento
  • Idee per il miglioramento
  • Elenco standardizzato di filtri dell'aria per unità di trattamento aria


Contatta un rappresentante nella tua zona per richiedere consulenza, in modo da poter iniziare a valutare una migliore filtrazione del tuo impianto di trattamento aria .

 Download this helpful infographic on a recommended two-stage filtration upgrade.PDF icon

 

Your building requires safety checks prior to reopening after a period of downtime. To aid you in your preparation, we compiled a list of steps that you can follow to feel confident in the cleanliness of your building.

  1. Clean and sterilize all floors, counters, and even the air according to suggestions from the CDC’s COVID-19 Resources for Businesses and Employers.
  2. Prior to running your HVAC system at normal capacity again, replace existing air filters with clean filters.
    1. Safety First – Before replacing dirty air filters, first be sure to wear gloves, a mask, and safety glasses. As you slowly remove the current air filters, take care not to dislodge any of the dust and debris, which can otherwise re-enter the airstream inside your building.
    2. Bag Disposal – Now that you have removed the dirty air filters, place them into bags and seal these bags as further protection against the collected dust and particles harming people who are exposed to them.
    3. Clean Air Filters Installation – Place clean air filters inside the HVAC unit with the air flow arrow pointing toward the blower motor. You will find this air flow arrow on the frame of your air filter.
  3. View these additional tips & suggestions on filtration and disinfection of your HVAC system from ASHRAE (American Society for Heating, Refrigeration, and Air-Conditioning Engineers).
  4. Before reopening your business, ramp up your HVAC system to normal levels, allowing air to circulate for a couple of hours before people enter the building.

 

Importance of Air Filtration

As noted above, healthy buildings experts suggest replacing current air filters as part of this preparation process. In many cases, they urge businesses to upgrade their filter efficiency to capture even more small particles, helping to keep customers and employees safe from airborne particles.

 

Pathogen-carrying Particles

Tiny virus particles generally piggyback on comparatively larger dust particles or droplets as they travel through a building. In general, virus particles tend to hitch a ride on particles and droplets in the size range of 0.3 to 1.0 microns. Fortunately, air filters with a rating of MERV 16 or higher capture a minimum of 95% of airborne particles in this size range.

Piggyback virus Particles Air FIlter

The Case for Upgrading

Even better, a combination of high-efficiency air filters captures nearly all of the particles in this size range, eliminating typical virus-carrying particles from airstreams inside buildings. For example, a MERV 11 prefilter in conjunction with a MERV 16 secondary filter removes 98.66% of particles in the 0.3-1.0 micron size range in one pass. By contrast, if you rely on lower efficiency filters such as a MERV 8 prefilter with a MERV 14 secondary filter, it would take three passes through the filters to remove the same percentage of particles.

Prefilter and Secondary Filter Set UP

Particle Efficiency vs. Energy Efficiency

Generally you can expect that an upgrade in particle efficiency will cause a decrease in energy efficiency. Besides translating to a higher energy bill, you could also be faced with additional wear and tear on your HVAC equipment. However, thanks to innovative filter design and media options, you can usually find a way to upgrade your particle efficiency without breaking the bank or causing undue damage to your HVAC equipment.

 

We’re Here to Help

AAF Flanders offers a suite of air filtration tools, such as TCO Diagnostic® and Sensor360®, to identify a solution that is tailored to your needs and circumstances. Our process starts with a complimentary facility audit, which provides you with:

  • Professional analysis
  • Benchmark data
  • Ideas for improvement
  • Standardized list of air filters by air handler unit

 

Contact a representative in your area to request a FREE air filtration audit, so you can get started on a custom air filtration upgrade.

 Download this helpful infographic on a recommended two-stage filtration upgrade.PDF icon

 

Your building requires safety checks prior to reopening after a period of downtime. To aid you in your preparation, we compiled a list of steps that you can follow to feel confident in the cleanliness of your building.

  1. Clean and sterilize all floors, counters, and even the air according to suggestions from the CDC’s COVID-19 Resources for Businesses and Employers.
  2. Prior to running your HVAC system at normal capacity again, replace existing air filters with clean filters.
    1. Safety First – Before replacing dirty air filters, first be sure to wear gloves, a mask, and safety glasses. As you slowly remove the current air filters, take care not to dislodge any of the dust and debris, which can otherwise re-enter the airstream inside your building.
    2. Bag Disposal – Now that you have removed the dirty air filters, place them into bags and seal these bags as further protection against the collected dust and particles harming people who are exposed to them.
    3. Clean Air Filters Installation – Place clean air filters inside the HVAC unit with the air flow arrow pointing toward the blower motor. You will find this air flow arrow on the frame of your air filter.
  3. View these additional tips & suggestions on filtration and disinfection of your HVAC system from ASHRAE (American Society for Heating, Refrigeration, and Air-Conditioning Engineers).
  4. Before reopening your business, ramp up your HVAC system to normal levels, allowing air to circulate for a couple of hours before people enter the building.

 

Importance of Air Filtration

As noted above, healthy buildings experts suggest replacing current air filters as part of this preparation process. In many cases, they urge businesses to upgrade their filter efficiency to capture even more small particles, helping to keep customers and employees safe from airborne particles.

 

Pathogen-carrying Particles

Tiny virus particles generally piggyback on comparatively larger dust particles or droplets as they travel through a building. In general, virus particles tend to hitch a ride on particles and droplets in the size range of 0.3 to 1.0 microns. Fortunately, air filters with a rating of MERV 16 or higher capture a minimum of 95% of airborne particles in this size range.

Piggyback virus Particles Air FIlter

The Case for Upgrading

Even better, a combination of high-efficiency air filters captures nearly all of the particles in this size range, eliminating typical virus-carrying particles from airstreams inside buildings. For example, a MERV 11 prefilter in conjunction with a MERV 16 secondary filter removes 98.66% of particles in the 0.3-1.0 micron size range in one pass. By contrast, if you rely on lower efficiency filters such as a MERV 8 prefilter with a MERV 14 secondary filter, it would take three passes through the filters to remove the same percentage of particles.

Prefilter and Secondary Filter Set UP

Particle Efficiency vs. Energy Efficiency

Generally you can expect that an upgrade in particle efficiency will cause a decrease in energy efficiency. Besides translating to a higher energy bill, you could also be faced with additional wear and tear on your HVAC equipment. However, thanks to innovative filter design and media options, you can usually find a way to upgrade your particle efficiency without breaking the bank or causing undue damage to your HVAC equipment.

 

We’re Here to Help

AAF Flanders offers a suite of air filtration tools, such as TCO Diagnostic® and Sensor360®, to identify a solution that is tailored to your needs and circumstances. Our process starts with a complimentary facility audit, which provides you with:

  • Professional analysis
  • Benchmark data
  • Ideas for improvement
  • Standardized list of air filters by air handler unit

 

Contact a representative in your area to request a FREE air filtration audit, so you can get started on a custom air filtration upgrade.


 First Stage Second Stage Installed # of Circulations to 
Capture 95% ePM1
Comment
 98% ePM1  -

BioCel V HXL E10, ΔP int. 150 Pa (E10), 
592 x 592 x 440

 > 1x   Single filter, high efficiency, secure
 70% ePM10  55% ePM1  

DriPak SF ΔP, int. 90 Pa (M6)

592 x 592 x 635

---

VVXL 55% ePM1, ΔP int. 75 Pa (F7)

592 x 592 x 292

 > 3x  165 Pa system resistance
 65% ePM2,5  85% ePM1  

DriPak SX, ΔP int. 150 Pa (F7)

592 x 592 x 635

---

VVXL 85% ePM1, ΔP int. 130 Pa (F9)

592 x 592 x 292

  >2 x  280 Pa system resistance, better selection 
 possible with lower resistance and higher efficiency

 


Soluzione incentrata sul miglioramento dell'efficienza:
Soluzione incentrata sul miglioramento dell'efficienza: