lundi 18 mai 2020

 Téléchargez cette infographie utile sur une mise à niveau de filtration en deux étapes recommandée.

 

A la suite d’une longue période d’arrêt, vos bâtiments nécessitent des contrôles de sécurité avant leur réouverture. Pour vous aider dans le suivi de ces actions de contrôles, nous avons listé les étapes relatives au contrôle des éléments de filtration d’air afin de vous assurer de la qualité de votre air intérieur.

1. Nettoyez et désinfectez tous les sols, les comptoirs et l’air ambient selon les indications de l’Association Européenne d’hygiène des systèmes de ventilation – Voir plus d’informations, ici.
2. Avant le redémarrage de votre système HVAC à son débit opératoire normal, veillez au remplacement des filtres à air existants par de nouveaux filtres. 

a. La sécurité en priorité – Avant de remplacer vos filtres à air usages, assurez-vous de porter des gants, un masque et des lunettes de sécurité. Lors du retrait des filtres usages,  veillez à ne pas secouer les filtres afin d’éviter que la poussière et les polluants continues ne soient renvoyés dans votre système de ventilation.
b. Retraitement des filtres usagés  – Maintenant que vos filtres à air usagés ont été retirés, placez-les dans des sacs dédiés et fermez-les hermétiquement afin de ne pas générer de pollution supplémentaire de l’air ambient lors de leur manipulation. 
c. Installation des filtres neufs  – Placez les filtres à air neuf dans la centrale de traitement d’air, la flèche de sens de passage d’air en direction du ventilateur. Vous trouverez cette indication sur le cadre de votre filtre à air.

3. Dans la mesure du possible, il est conseillé de ne pas faire fonctionner vos systèmes de climatisation à recirculation d’air en local, tels que les ventilo-convecteurs qui sont en général, dotés d’une très faible efficacité de filtration et n’auront pas d’incidence sur la protection de vos locaux.
4. Avant d’ouvrir à nouveau vos bâtiments, faites monter votre système HVAC à un débit opératoire normal, permettant ainsi une recirculation de l’air pendant plusieurs heures avant que vos collaborateurs n’entrent dans les bâtiments.  

 

L’importance de la filtration de l’air 

Le remplacement des filtres à air n’est en soi, pas nécessaire car il est peu probable que l’air extérieur soit vecteur de transmission du coronavirus. Les filtres doivent cependant être remplacés conformément aux périodicités de maintenance normales afin d’assurer une recirculation d’air optimum sans excéder les pertes de charges maximales conseillées pour chacun des étages de filtration. A noter tout de même que les experts bâtiments suggèrent d’améliorer l’efficacité des filtres afin d’augmenter le pouvoir de captation des petites particules dans le but d’optimiser la protection des personnels de retour dans les bâtiments. 

 

Les particules porteuses d’agents pathogènes 

De minuscules particules virales se superposent généralement à des particules de poussières ou gouttelettes. De façon générale, ces molécules virales ont tendance à se poser sur des particules de tailles comprises entre 0,3 et 1 micron (ePM1). Heureusement, un chaînage de filtration d’air à indice ePM1 ou supérieur, permettra de capturer a minima 95% de ces particules en suspension dans l’air.

 

 

Combinaisons de filtres possibles pour capturer au moins 95% des particules d'ePM1:  

Solution axée sur une faible résistance du système:
1er étage: DriPak SX ePM10 70%
Second étage: Varicel V XL ePM1 55%
Nbre de passages d’air nécessaires à la capitation de 95% ePM1: >3


Solution axée sur l'amélioration de l'efficacité:
1er étage: DriPak SX ePM2,5 65%
Second étage: Varicel V XL ePM1 85%
Nbre de passages d’air nécessaires à la capitation de 95% ePM1: >2

Notre solution recommandée pour une efficacité maximale avec moins de changements d'air possibles:
1er étage: DriPak NX ePM1 60%
Second étage: BioCel V (H)XLA 95, E10 avec une efficacité de 98% sur les particules ePM1
Nbre de passages d’air nécessaires à la capitation de 95% ePM1: >1

 

 

 


Efficacité de filtration et coût énergétique 
En règle générale, vous pouvez vous attendre à ce qu'une amélioration de l'efficacité de la filtration entraîne une diminution de l'efficacité énergétique. En plus de se traduire par une facture énergétique plus élevée, vous pourriez également être confronté à une usure supplémentaire de votre équipement HVAC. Grâce aux  médias brevetés AAF et à leur design spécifique, les filtres HVAC AAF sont développés et dimensionnés pour assurer une sécurité optimale de vos installations tout en générant la perte de charge initiale la plus faible possible afin de minimiser le  coût énergétique induit par l’utilisation de nos éléments filtrants. 

AAF propose un ensemble d'outils d’aide au dimensionnement de vos consommables filtration d'air, tels que notre logiciel  TCO Diagnostic® et moniteurs de contrôle in-situ  Sensor360®,  pour identifier une solution adaptée à vos besoins et à votre situation.

Notre processus commence par un audit gratuit des installations, qui vous offre:

  • une analyse et expertise de vos installations
  • Des données de référence afin d’envisager une amélioration de votre filtration d’air
  • Une approche technique et commerciale axée sur le coût total de possession de vos installations 
  • Une liste normalisée des filtres à air proposés par application de traitement d’air 


Contactez un représentant AAF de votre région afin d’initier une mise à niveau personnalisée de votre filtration d’air

 Download this helpful infographic on a recommended two-stage filtration upgrade.PDF icon

 

Your building requires safety checks prior to reopening after a period of downtime. To aid you in your preparation, we compiled a list of steps that you can follow to feel confident in the cleanliness of your building.

  1. Clean and sterilize all floors, counters, and even the air according to suggestions from the CDC’s COVID-19 Resources for Businesses and Employers.
  2. Prior to running your HVAC system at normal capacity again, replace existing air filters with clean filters.
    1. Safety First – Before replacing dirty air filters, first be sure to wear gloves, a mask, and safety glasses. As you slowly remove the current air filters, take care not to dislodge any of the dust and debris, which can otherwise re-enter the airstream inside your building.
    2. Bag Disposal – Now that you have removed the dirty air filters, place them into bags and seal these bags as further protection against the collected dust and particles harming people who are exposed to them.
    3. Clean Air Filters Installation – Place clean air filters inside the HVAC unit with the air flow arrow pointing toward the blower motor. You will find this air flow arrow on the frame of your air filter.
  3. View these additional tips & suggestions on filtration and disinfection of your HVAC system from ASHRAE (American Society for Heating, Refrigeration, and Air-Conditioning Engineers).
  4. Before reopening your business, ramp up your HVAC system to normal levels, allowing air to circulate for a couple of hours before people enter the building.

 

Importance of Air Filtration

As noted above, healthy buildings experts suggest replacing current air filters as part of this preparation process. In many cases, they urge businesses to upgrade their filter efficiency to capture even more small particles, helping to keep customers and employees safe from airborne particles.

 

Pathogen-carrying Particles

Tiny virus particles generally piggyback on comparatively larger dust particles or droplets as they travel through a building. In general, virus particles tend to hitch a ride on particles and droplets in the size range of 0.3 to 1.0 microns. Fortunately, air filters with a rating of MERV 16 or higher capture a minimum of 95% of airborne particles in this size range.

Piggyback virus Particles Air FIlter

The Case for Upgrading

Even better, a combination of high-efficiency air filters captures nearly all of the particles in this size range, eliminating typical virus-carrying particles from airstreams inside buildings. For example, a MERV 11 prefilter in conjunction with a MERV 16 secondary filter removes 98.66% of particles in the 0.3-1.0 micron size range in one pass. By contrast, if you rely on lower efficiency filters such as a MERV 8 prefilter with a MERV 14 secondary filter, it would take three passes through the filters to remove the same percentage of particles.

Prefilter and Secondary Filter Set UP

Particle Efficiency vs. Energy Efficiency

Generally you can expect that an upgrade in particle efficiency will cause a decrease in energy efficiency. Besides translating to a higher energy bill, you could also be faced with additional wear and tear on your HVAC equipment. However, thanks to innovative filter design and media options, you can usually find a way to upgrade your particle efficiency without breaking the bank or causing undue damage to your HVAC equipment.

 

We’re Here to Help

AAF Flanders offers a suite of air filtration tools, such as TCO Diagnostic® and Sensor360®, to identify a solution that is tailored to your needs and circumstances. Our process starts with a complimentary facility audit, which provides you with:

  • Professional analysis
  • Benchmark data
  • Ideas for improvement
  • Standardized list of air filters by air handler unit

 

Contact a representative in your area to request a FREE air filtration audit, so you can get started on a custom air filtration upgrade.

 Download this helpful infographic on a recommended two-stage filtration upgrade.PDF icon

 

Your building requires safety checks prior to reopening after a period of downtime. To aid you in your preparation, we compiled a list of steps that you can follow to feel confident in the cleanliness of your building.

  1. Clean and sterilize all floors, counters, and even the air according to suggestions from the CDC’s COVID-19 Resources for Businesses and Employers.
  2. Prior to running your HVAC system at normal capacity again, replace existing air filters with clean filters.
    1. Safety First – Before replacing dirty air filters, first be sure to wear gloves, a mask, and safety glasses. As you slowly remove the current air filters, take care not to dislodge any of the dust and debris, which can otherwise re-enter the airstream inside your building.
    2. Bag Disposal – Now that you have removed the dirty air filters, place them into bags and seal these bags as further protection against the collected dust and particles harming people who are exposed to them.
    3. Clean Air Filters Installation – Place clean air filters inside the HVAC unit with the air flow arrow pointing toward the blower motor. You will find this air flow arrow on the frame of your air filter.
  3. View these additional tips & suggestions on filtration and disinfection of your HVAC system from ASHRAE (American Society for Heating, Refrigeration, and Air-Conditioning Engineers).
  4. Before reopening your business, ramp up your HVAC system to normal levels, allowing air to circulate for a couple of hours before people enter the building.

 

Importance of Air Filtration

As noted above, healthy buildings experts suggest replacing current air filters as part of this preparation process. In many cases, they urge businesses to upgrade their filter efficiency to capture even more small particles, helping to keep customers and employees safe from airborne particles.

 

Pathogen-carrying Particles

Tiny virus particles generally piggyback on comparatively larger dust particles or droplets as they travel through a building. In general, virus particles tend to hitch a ride on particles and droplets in the size range of 0.3 to 1.0 microns. Fortunately, air filters with a rating of MERV 16 or higher capture a minimum of 95% of airborne particles in this size range.

Piggyback virus Particles Air FIlter

The Case for Upgrading

Even better, a combination of high-efficiency air filters captures nearly all of the particles in this size range, eliminating typical virus-carrying particles from airstreams inside buildings. For example, a MERV 11 prefilter in conjunction with a MERV 16 secondary filter removes 98.66% of particles in the 0.3-1.0 micron size range in one pass. By contrast, if you rely on lower efficiency filters such as a MERV 8 prefilter with a MERV 14 secondary filter, it would take three passes through the filters to remove the same percentage of particles.

Prefilter and Secondary Filter Set UP

Particle Efficiency vs. Energy Efficiency

Generally you can expect that an upgrade in particle efficiency will cause a decrease in energy efficiency. Besides translating to a higher energy bill, you could also be faced with additional wear and tear on your HVAC equipment. However, thanks to innovative filter design and media options, you can usually find a way to upgrade your particle efficiency without breaking the bank or causing undue damage to your HVAC equipment.

 

We’re Here to Help

AAF Flanders offers a suite of air filtration tools, such as TCO Diagnostic® and Sensor360®, to identify a solution that is tailored to your needs and circumstances. Our process starts with a complimentary facility audit, which provides you with:

  • Professional analysis
  • Benchmark data
  • Ideas for improvement
  • Standardized list of air filters by air handler unit

 

Contact a representative in your area to request a FREE air filtration audit, so you can get started on a custom air filtration upgrade.


 First Stage Second Stage Installed # of Circulations to 
Capture 95% ePM1
Comment
 98% ePM1  -

BioCel V HXL E10, ΔP int. 150 Pa (E10), 
592 x 592 x 440

 > 1x   Single filter, high efficiency, secure
 70% ePM10  55% ePM1  

DriPak SF ΔP, int. 90 Pa (M6)

592 x 592 x 635

---

VVXL 55% ePM1, ΔP int. 75 Pa (F7)

592 x 592 x 292

 > 3x  165 Pa system resistance
 65% ePM2,5  85% ePM1  

DriPak SX, ΔP int. 150 Pa (F7)

592 x 592 x 635

---

VVXL 85% ePM1, ΔP int. 130 Pa (F9)

592 x 592 x 292

  >2 x  280 Pa system resistance, better selection 
 possible with lower resistance and higher efficiency