|
 |
Cyclones
Use the AAF Cyclone as your primary collector with or without the optional after filter, for dusts of moderate to coarse particle size. The AAF cyclone will remove up to 99% (by weight) of dust generated by steel grinding and sawdust. Use it as a pre-cleaner for any of AAF’s more efficient final collectors such as the ArrestAll, OptiFlo or Design M FabriPulse. By reducing the dust load on the higher efficiency final filter, a more economical final filter may be selected and a longer filter life can be obtained. AAF offers 11 basic selections to handle air flows from 800 cfm to 12,000 cfm. These are sized to deal with the majority of small to medium industrial dust collection applications.
View Details
|
 |
WFE 150
The OptiFlo WFE 150 is the ideal solution for the capturing of weld fume in the workplace. It is a portable, compact and affordable weld fume collector. The WFE 150 is designed using the latest technology in fume capture and is suitable for most industrial environments. Capacity is 760 CFM at the hood and units come in 120V single phase or 230/460V 3 phase versions.
View Details
|
 |
WFE 150P/WFE 300P
The AAF WFE 150P and WFE 300P Portable Weld Fume Extractors are self-contained, portable units that capture welding smoke and fume at the source. All units feature high efficiency cartridge filters and the ability to pulse clean the cartridges as well as recycle cleaned air back into the plant. The activated carbon filters for gas adsorption and availability in one or two arm configurations are other great benefits of these units. Capacities range from 700 CFM to 1530 CFM. The units come in 1.5 and 3.0 horsepower models as well as 120V single phase or 230/460V 3 phase versions.
View Details
|
 |
WFE 150 Carbo /WFE 300 Carbo
The AAF WFE 150 and WFE 300 Carbo Portable Weld Fume Extractors are self-contained, portable units that capture welding smoke and fume at the source. All units feature high efficiency cartridge filters and the ability to recycle cleaned air back into the plant. The heavy-duty activated carbon filters for gas adsorption and availability in one or two
arm configurations are benefits of these units. Capacities range from 700 CFM to 1530 CFM and units come in 1.5 and 3.0 horsepower models as well as 120V single phase or 230/460V 3 phase versions.
View Details
|
 |
OptiFlo® Downdraft Bench
The AAF OptiFlo Downdraft Bench (Model DDB) is the ideal air cleaning solution for those workbench tasks that produce airborne dust, particles, and fume. The OptiFlo DDB is ideal for collecting dust produced by cutting, finishing, sanding, de-burring, grinding, buffing, polishing, soldering, and light welding. The OptiFlo DDB offers a choice of two large work surfaces. The Model DDB5 has an actual work surface that measures 29 inches deep by 5 feet wide, while the Model DDB7 is a generous 29 inches deep by 7 feet wide. The OptiFlo DDB can be used for single or multiple workstations. The work surface is ergonomically selected to be 31 inches above the floor and an indented front panel allows the user to sit or stand while working at the work-bench. An optional ventilated back wall is available for the DDB5 and DDB7 (Shown).
View Details
|
 |
OptiFlo® HP Series
The OptiFlo HP dust collector is recommended for use as a product receiver in high pressure, high dust load applications such as high pressure product conveying. The OptiFlo HP will handle vacuum pressures up to 8.67 inches of mercury (4.259 psig or 118.11 inches H2O). The OptiFlo HP can be used for filtering fumes and dusts in mechanical, chemical or pharmaceutical applications. Contaminated air enters at the bottom of the unit and due to the rapid decrease in velocity and the first stage diffuser, the larger particles fall into the dust collection bin. The finer or lighter particles flow through the unit, where the cartridge filters are located, and are captured with 99.5% efficient cartridges. Pulsed cleaning is accomplished by diaphragm valves controlled by a choice of PLC or automatic timer. The OptiFlo HP is available in 12 sizes to accommodate airflows between 880 CFM and 12,000 CFM. View Details
|
 |
OptiFlo® ECB
The AAF OptiFlo Environmental Control Booth (Model ECB) is the answer when a complete dust containment system is required quickly in the minimum amount of space and with the maximum amount of flexibility.
The OptiFlo ECB is constructed using standard modular sections. A booth can be erected using a minimum of two modules with a width of 6'-3-1/2" up to a maximum of six modules with a width of 18'-10-1/2". The booth fits within a headroom of 11'-5". Airflow ratings vary from 4,700 cfm to 14,100 cfm. The OptiFlo ECB includes a 72" deep sound reducing intake enclosure with 2" of foam sound insulation to channel the airflow and contain the generated dust.
View Details
|
|
