ArrestAll® Dust Collector
Self-Contained Shaker Type Dust Collector
The AAF ArrestAll shaker dust collector is the solution to your small and medium intermittent air pollution problems. This fully self contained dust collector provides high efficiency air cleaning on intermittent dry dust collection applications such as those found in grinding and woodworking operations. It is simple to install and maintain and is highly cost effective. The ArrestAll comes with its own internal fan, is a self cleaning dust collector, and is fully automatic.
|
Typical Applications
|
|
Industries
|
Processes
|
- Woodworking
- Ceramics
- Paper
- Pharmaceuticals
- Rubber & Plastic
- Rock & Related Products
|
- Grinding
- Sanding
- Sawing
- Polishing
- Trimming
- Packaging
- Bin Ventilation
|
Efficiency
The ArrestAll dust collector provides 99+% air cleaning efficiency on large particle dusts generated by typical metalworking, woodworking, and other grinding, cutting, and sawing operations. The ArrestAll is available with a high efficiency final filter option when small amounts of fine particle dusts are present.
Ease of Maintenance
The ArrestAll filters are accessed through doors located on the front of the collector. This allows all of the filters to be installed or removed quickly and efficiently without contaminating the clean side of the dust collector. Filters are easily removed and installed by hand, no special tools are required. The maximum filter height of 27 inches means that the ArrestAll can be installed in locations with limited headroom and that the filters are accessible from floor level.
Rugged Construction
The ArrestAll is constructed using 14 gauge steel and is true industrial quality. It is structurally reinforced to resist the full pressure generated by its internal fan and the forces produced by the operation of the shaker filter cleaning mechanism.
How the ArrestAll Works
Dust laden air enters through the inlet of the ArrestAll and is forced to make a 90 degree turn causing the momentum of the heavier particles to carry them directly to the collection container. The remaining dust collects on the outer surfaces of the filter. Clean filtered air flows out of the filter pocket into the fan and is discharged through the outlet. The collected dust is periodically removed from the fabric pockets of the filter by an automatic (or manual) shaker system.
Additional ArrestAll Details
Review Installation & Operation Manual
|
