|
 SINGLE POCKET AND TWO POCKET AMERPAK CUBE FILTERS
- 25 - 35% Efficiency
- Self-sealing design provides fast, easy installation
- Fail-safe installation requires no clips or latches
- High dust holding capacity provides long service life
- Moisture resistant, polyester media
- Available with header
CUBE FILTER DESIGN IS IDEAL FOR A WIDE VARIETY OF APPLICATIONS
- Pre-filters - to extend the life of high efficiency filters
- First stage filters in hospital systems requiring 25% efficiency
- Single stage filtration systems - cube filters provide long service life and excellent protection to prevent dirt build up on coils and ducts
- Paint overspray collection - cube filters follow scrubbers in wet booths or follow coatings collection pads in dry booths to reduce stack emissions
THREE-PLY MEDIA DESIGN CATCHES AND HOLDS MORE DIRT
- Upstream Layer
Stratified 40/15 dual denier fibers form two distinct layers of progressive density media. Larger, heavier particles are caught in the 40 denier front portion of the media without faceloading. Smaller particles are caught in the 15 denier back portion.
- Downstream Layer
A dense layer of 6 denier fibers serves as the final filter to catch finer particles.
- Self-sealing Design
The media is sewn around an internal wire support frame that forms a friction fit with the holding frame. The self-sealing design provides the fastest, easiest installation of any extended surface filter on the market. Simply push the filter into the frame. The polyester media forms a built-in gasket between the wire support frame and holding frame that secures the filter in place and seals it to prevent bypass. No clips, latches, or basket-type wire retainers are required.
- Single Pocket or Two Pocket Models
Two pockets increase exposure of the media to incoming dirty air. Higher dust holding capacity extends service life. Two pocket models also provide lower initial resistance.
- Pressure Sensitive, Dirt-Holding Adhesive
A non-drying, pressure sensitive adhesive designed exclusively for synthetic media is applied to the downstream layer. The adhesive prevents dirt particles from migrating through the media and blowing downstream.
- Header Style
AmerPak filters are available with a 13/16" thick U-channel header for side access installations or other systems where a header is required.
Top
|
